Schroeder Industries.
Schroeder Industries.
Leetsdale, PA 15056
Phone: (724) 318-1100
Fax: (724) 318-1200
Email: sisales@schroederindustries.com
Website: www.schroederindustries.com
Print Back
The FCU 1315 is a portable service unit for the temporary measurement of particulate contamination, water saturation and fluid temperature in diesel storage, diesel transfer, and diesel filling applications. The FCU 1315 will measure contamination levels of diesel fuel, as well as mineral based hydraulic oils compatible with Viton® seals. The FCU 1315 is not compatible with water glycol fluids. The integrated pump and the hoses with test point connections, which are included with the FCU 1315, allow operation on diesel fuel storage tanks and transfer circuits, as well as on hydraulic reservoirs, control circuits, and pressure circuits. All measurement data (ISO, SAE/NAS and % saturation and temperature in ºC or ºF) are stored in files (measurement value file) and folders (measurement points) in the internal data memory. The data memory takes place with a time stamp. The evaluation can then be readily carried out on the PC in MS Excel or in HYDAC's own Fluid Monitoring software (FluMoS).
Unit of Measure

Specifications

Short Description

 N/A Si portable particle counter with Saturation and temp sensor

Industry Standards/Certifications

 N/A ISO 4406:1987; NAS 1638 or ISO 4406 1999, SAE AS 4059 (d)

Type

 N/A Contamination/Saturation Sensor

Seal Material

 N/A Viton

Medium

 N/A Diesel Fuel and Mineral Oil Based Hydraulic Fluids

Weight

 N/A 13.15 kg29.00 lb

Mounting Type

 N/A Portable

Operating Temperature [Min]

 N/A 0 ºC32 ºF

Operating Temperature [Max]

 N/A 45 ºC113 ºF

Inlet Size

 N/A Minimess® 1620 Test Point

Inlet Type

 N/A Minimess® 1620 Test Point

Output Signal

 N/A HYDAC Sensor Interface (HSI)

Power Supply

 N/A 100 to 240 VAC

Operating Pressure [Max]

 N/A 345 bar5000 psi

Viscosity

 N/A 350 cSt1600 SUS

Communication

 N/A Universal Serial Bus (USB-A); M12 x 1, 5 Pole; Bluetooth® 1.2, Class 3

Degree of Protection

 N/A IP50 in operation, IP67 when closed

Features

Features

 N/A Portable contamination monitor provides particle counts and percent relative humidity of the fluid. The integral pump allows for testing of open reservoirs and samples. The data and outputs are compatible with FluMoS Light and FluMoS mobile. The data is stored onboard, downloaded to a thumb drive, and wirelessly accessible via Bluetooth.