Request Information
  • Price competitive filter patented de-aeration performance and quality protected elements.
  • Use a less complex hose and fitting routing system.
  • Sure to dominate the space typically owned by low-performing spin-on oil filters.
Unit of Measure

Filter Housing Specifications

Flow Rating

 N/A 40 gpm151 L/min

Operating Pressure [Max]

 N/A 7 bar100 psi

Minimum Yield Pressure

 N/A 24 bar350 psi

Rated Fatigue Pressure

 N/A 7 bar100 psi

Operating Temperature [Min]

 N/A -29 ºC-20 ºF

Operating Temperature [Max]

 N/A 107 ºC225 ºF

Cracking Bypass Setting

 N/A 2 bar25 psi

Full Flow Bypass Setting

 N/A 3 bar36 psi

Fluid Compatibility

Type Fluid

 N/A Petroleum Based Fluids, High Water Content, Invert Emulsions, Water Glycols, Phosphate Esters

Appropriate Schroeder Media (Petroleum Based Fluids)

 N/A Z-Media® and ASP® Media (Synthetic)

Appropriate Schroeder Media (High Water Content)

 N/A Z-Media® and ASP® Media (Synthetic)

Appropriate Schroeder Media (Invert Emulsions)

 N/A Z-Media® and ASP® Media (Synthetic)

Appropriate Schroeder Media (Water Glycols)

 N/A Z-Media® and ASP® Media (Synthetic)

Appropriate Schroeder Media (Phosphate Esters)

 N/A Z-Media® (Synthetic) and ASP® Media (Synthetic)

Element Performance Information and Dirt Holding Capacity (DHC)

Filtration Ratio Per International Standardization Organization (ISO) 4572/National Fire Protection Association (NFPA) T3.10.8.8 (ßx ≥ 75)

 N/A 7.4

Filtration Ratio Per International Standardization Organization (ISO) 4572/National Fire Protection Association (NFPA) T3.10.8.8 (ßx ≥ 100)

 N/A 8.2

Note for Filtration Ratio Per International Standardization Organization (ISO) 4572/National Fire Protection Association (NFPA) T3.10.8.8

 N/A Using automated particle counter (APC) calibrated per International Standardization Organization (ISO) 4402

Filtration Ratio with respect to International Standardization Organization (ISO) 16889 (ßx(c) ≥ 200)

 N/A 8.0

Filtration Ratio with respect to International Standardization Organization (ISO) 16889 (ßx(c) ≥ 2000)

 N/A 10.0

Note for Filtration Ratio with respect to International Standardization Organization (ISO) 16889

 N/A Using automated particle counter (APC) calibrated per International Standardization Organization (ISO) 11171

Element Burst Pressure

 N/A 6 bar86 psi

Flow Direction

 N/A Inside Out

Element Nominal Outside Diameter

 N/A 3.71 in94.23 mm

Specifications

Type

 N/A Tank Mounted Filter

Filter Rating

 N/A 10 µm

Seal Material

 N/A Buna

Porting

 N/A SAE-16

Gauge Port Option (Elbow Only)

 N/A Electric Switch

Features and Benefits

Features and Benefits

 N/A
  • Patent Pending In-tank filter design
  • Lightweight and as part of a tank optimization package can reduce reservoir size
  • Lock & Key Quality Protected, OEM Specific Interfaces available
  • Superior de-aeration performance

Note

Note

 N/A Check valve prevents hydraulic oil to spill when changing out the element and it is recommended. Not including could reduce differential pressure slightly but risks a greater hydraulic oil spill on element change out.