The FCU1310 is a portable service unit for the temporary measurement of particulate contamination, water saturation, and fluid temperature in hydraulic systems. The integrated pump and the hoses included in the scope of delivery of the FCU1310 enable application on control circuits, pressure circuits, and depressurized containers. All measurement data (ISO, SAE/NAS and % saturation and temperature °C or °F) are stored in files (measurement value file) and folders (measurement points) in the internal data memory. The data memory takes place with a time stamp. The evaluation can then be readily carried out on the PC in MS Excel or in HYDAC's own Fluid Monitoring Software (FluMoS). For application in hydraulic systems, for the service department in mobile hydraulics and for maintenance. Suitable for hydraulic oils up to 350 mm2/s (hydraulic oils up to ISO VG 68). For short-term operation (S4, in accordance with DIN EN 60034/VDE 0530).

The Schroeder Pro: Total Fluid Life is a state-of-the-art portable service unit, designed to provide invaluable, real-time insight into the health of synthetic oils, organic oils, mineral oils, and diesel fuel.

The Schroeder Pro: Total Fluid Health is a revolutionary portable service unit, designed to measure and differentiate particulate contamination, as well as determine oil life, relative water content, and temperature.

Hand held filtration system 120 V, 60 Hz, 1 Ph (0.25 kW) single GH 9" housing (10 Micron element) FPM, Viton® seals back-pressure indicator 4 GPM flow rate

Offline filtration systems with high flow rate options and high efficiency, high capacity elements.  Many component combinations for customer customizable filtration systems to supplement in-line filtration

• Removal of oil aging products, solid particles and water
• Improvement in component lifetime
• Greater machine availability

• High Dewatering Rates and particulate removal in one system
• Simple Controls; RUN/DRAIN modes
• Reduce fluid recycling cost
• No expensive vacuum pump to service and replace
• Patent pending mass transfer technology uses ambient air to optimize and control dewatering rates
• Compact, efficient footprint - same diameter as a 55 gallon drum
• Remove free and dissolved water
• Highly effective in low and high humidity elements

• High Dewatering Rates and particulate removal in one system
• Simple Controls
• Reduce fluid recycling cost
• No expensive vacuum pump to service and replace
• Patent pending mass transfer technology uses ambient air to optimize and control dewatering rates
• Compact, efficient footprint
• Remove free and dissolved water
• Highly effective in low and high humidity elements
• Automatic air bleed on filter housing

• Water Sensor standard on all units to show percent saturation
• Removes 100% of free and over 90% of dissolved water, as well as 100% of free and over 90% of dissolved gases
• Maintenance, operating, troubleshooting instructions are in HMI (touchscreen) Automatic mode enables user-defined system shutdowns
• Use of a low maintenance, dry running claw vacuum pump helps to avoid any dangerous, chemically reactive by-products