• Micron ratings from 1 to 200
• All industry standard & custom sizes available
• Broad chemical compatibility
• High flow/low pressure drop
• Sewn or fully-welded construction
• Handles on all bags
• Choice of steel ring or plastic flange
• Temperature ratings to 200ºF (PO), 275ºF (PE ), 425ºF (HT) and 500ºF (Teflon®)

• Available in single to 10 bags (or more) per housing
• 100 or 150 psi models available
• ASME section VII U-stamped housings are available upon request
• Available in Size 1, Size 2, and up to Size 12
• Available with threaded clamp or swing bolt lid closures

• Micron ratings from 1 to 200
• All industry standard & custom sizes available
• Broad chemical compatibility
• High flow/low pressure drop
• Sewn or fully-welded construction
• Handles on all bags
• Choice of steel ring or plastic flange
• Temperature ratings to 200ºF (PO), 275ºF (PE ), 425ºF (HT) and 500ºF (Teflon®)

• Indicates critical pressure drops or when to change or clean a filter
• Colored bands allow you to quickly identify pressure drop across element
• Green (clean), Yellow (change), Red (Dirty) indicators

• Micron ratings from 1.0 to 50.0.
• Wide chemical compatibility
• Excellent oil absorbing capabilities
• NEARLY 11 POUNDS OIL RETENTION CAPACITY!
• Efficiencies to 95.0%.

• Depth and pleated technologies provide high flow/high dirt holding capacity
• Inside to out flow traps contaminant inside the element
• Fits in standard #1 or #2 bag housings
• Greatly reduces operating/maintenance costs

• Made of a polypropylene resin
• Meets FDA regulation 21CRF177.1520
• Certified under ANSI/NSF standard 42
• Provides high flow rates with minimum pressure drops
• Graduated density provides twice the life of other manufactures

• Constructed of polypropylene meltblown microfibers
• 93-97% efficient depending on micron level
• Each bag can handle flows up to 60 GPM
• Easy to use, convenient, high performance alternative to filter cartridges

• Duplex housings permit continuous operation
• Process is uninterrupted and thus reduces overall operation costs
• Two separate chambers that operate independently
• Allows one side to be serviced while the other is in use
• Constructed of either carbon steel, 304 stainless steel, or 316 stainless steel

• Micron ratings from 1 to 200
• All industry standard & custom sizes available
• Broad chemical compatibility
• High flow/low pressure drop
• Sewn or fully-welded construction
• Handles on all bags
• Choice of steel ring or plastic flange
• Temperature ratings to 200ºF (PO), 275ºF (PE ), 425ºF (HT) and 500ºF (Teflon®)

• Micron ratings from 1 to 200
• All industry standard & custom sizes available
• Broad chemical compatibility
• High flow/low pressure drop
• Sewn or fully-welded construction
• Handles on all bags
• Choice of steel ring or plastic flange
• Temperature ratings to 200ºF (PO), 275ºF (PE ), 425ºF (HT) and 500ºF (Teflon®)

• Micron ratings from 1 to 200
• All industry standard & custom sizes available
• Broad chemical compatibility
• High flow/low pressure drop
• Sewn or fully-welded construction
• Handles on all bags
• Choice of steel ring or plastic flange
• Temperature ratings to 200ºF (PO), 275ºF (PE ), 425ºF (HT) and 500ºF (Teflon®)

• Absolute (98%) micron ratings from 3 - 100 micron
• Microfiber layers are thermally-bonded and contain no adhesives, resin or silicone
• Graded-layer configuration provides low initial pressure drop and maximum dirt holding capacity
• Wide chemical compatibility

Magnetic Insert Bag Housing