Request Information
  • Price competitive filter patented de-aeration performance and quality protected elements.
  • Use a less complex hose and fitting routing system.
  • Sure to dominate the space typically owned by low-performing spin-on oil filters.
Unit of Measure

Filter Housing Specifications

Flow Rating

 N/A 40 gpm151 L/min

Operating Pressure [Max]

 N/A 100 psi7 bar

Minimum Yield Pressure

 N/A 350 psi24 bar

Rated Fatigue Pressure

 N/A 100 psi7 bar

Operating Temperature [Min]

 N/A -20 ºF-29 ºC

Operating Temperature [Max]

 N/A 225 ºF107 ºC

Cracking Bypass Setting

 N/A 25 psi2 bar

Full Flow Bypass Setting

 N/A 36 psi3 bar

Element Change Clearance

 N/A 4 in

Element Case

 N/A 12

Fluid Compatibility

Type Fluid

 N/A Petroleum Based Fluids, High Water Content, Invert Emulsions, Water Glycols, Phosphate Esters

Appropriate Schroeder Media (Petroleum Based Fluids)

 N/A Z-Media® and ASP® Media (Synthetic)

Appropriate Schroeder Media (High Water Content)

 N/A Z-Media® and ASP® Media (Synthetic)

Appropriate Schroeder Media (Invert Emulsions)

 N/A Z-Media® and ASP® Media (Synthetic)

Appropriate Schroeder Media (Water Glycols)

 N/A Z-Media® and ASP® Media (Synthetic)

Appropriate Schroeder Media (Phosphate Esters)

 N/A Z-Media® (Synthetic) and ASP® Media (Synthetic)

Element Performance Information and Dirt Holding Capacity (DHC)

Filtration Ratio Per International Standardization Organization (ISO) 4572/National Fire Protection Association (NFPA) T3.10.8.8 (ßx ≥ 75)

 N/A 7.4

Filtration Ratio Per International Standardization Organization (ISO) 4572/National Fire Protection Association (NFPA) T3.10.8.8 (ßx ≥ 100)

 N/A 8.2

Filtration Ratio Per International Standardization Organization (ISO) 4572/National Fire Protection Association (NFPA) T3.10.8.8 (ßx ≥ 200)

 N/A 4.0

Note for Filtration Ratio Per International Standardization Organization (ISO) 4572/National Fire Protection Association (NFPA) T3.10.8.8

 N/A Using automated particle counter (APC) calibrated per International Standardization Organization (ISO) 4402

Filtration Ratio with respect to International Standardization Organization (ISO) 16889 (ßx(c) ≥ 200)

 N/A 8.0

Filtration Ratio with respect to International Standardization Organization (ISO) 16889 (ßx(c) ≥ 2000)

 N/A 10.0

Note for Filtration Ratio with respect to International Standardization Organization (ISO) 16889

 N/A Using automated particle counter (APC) calibrated per International Standardization Organization (ISO) 11171

Dirt Holding Capacity (DHC)

 N/A 11 g

Element Burst Pressure

 N/A 86 psi6 bar

Flow Direction

 N/A Inside Out

Element Nominal Outside Diameter

 N/A 3.71 in94.23 mm

Element Nominal Length

 N/A 3.92 in99.57 mm

Specifications

Type

 N/A Tank Mounted Filter

Filter Rating

 N/A 10 µm

Seal Material

 N/A Buna

Porting

 N/A SAE-16

Check Valve

 N/A Yes

Gauge Port Option (Elbow Only)

 N/A ES = Electric Switch ES1 = Heavy Duty Electric Switch N = Plugged Y2 = Tricolor visual indicator (Back Mounted) Y2C = Tricolor visual indicator (Bottom Mounted)

Features and Benefits

Features and Benefits

 N/A
  • Patent Pending In-tank filter design
  • Lightweight and as part of a tank optimization package can reduce reservoir size
  • Lock & Key Quality Protected, OEM Specific Interfaces available
  • Superior de-aeration performance
  • 360 degree swivel connection. Lines stay connected during element changeouts
  • Anti-Drain Check valve option to keep lines from emptying during element change outs

Note

Note

 N/A Check valve prevents hydraulic oil to spill when changing out the element and it is recommended. Not including could reduce differential pressure slightly but risks a greater hydraulic oil spill on element change out.